SuperCut Premium Bimetal Bandsaw Blades are a superior blade with high alloy, high speed M2 steel teeth and a spring steel back to provide flexibility and toughness in the blade. Bimetal blades will give lower cost per cut on tough sawing jobs. Bimetal blades are welded by an electron beam under high vacuum to attach the strip of high speed M2 steel to the spring steel back. The teeth are then milled or ground into the M2 steel.
SuperCut Premium Bimetal Blades will cut a variety of materials, including wood, plastics, soft metals, standard steel products, and hard to cut metals such as stainless steel. Bimetal Blades have a higher initial cost than Carbon Tool Steel Blades, but they will generally outlast Carbon Tool Steel Blades by approximately 10 times, so the cost per cut is considerably less. Structural shapes should be cut at a blade speed of 350 fpm (feet per minute) wet, 200-250 fpm dry. When cutting solids, blade speeds should be 300 fpm or less wet, 200 fpm or less dry.
NOTE: all cutting should follow the simple rule of no less than 2 teeth in contact with the cut at all times, while not allowing more than approximately 10 teeth to contact the cut. Any fewer than 2 teeth in contact can allow the material to drop into the gullet of the blade, causing teeth to shear off. Allowing more than approximately 10 teeth to contact the cut can cause the teeth to not remove the waste effectively and can cause binding in the cut and also damage the teeth and set.
Need help choosing the right blade and options? Click here to learn how to choose the right bandsaw blade
Need help to find a blade size for your brand of bandsaw? Click here to search for the blade dimensions of your bandsaw
The Blade is Last a good while, cuts are clean/precise and be careful when handling the material you just cut as the edges are sharp.
This blade cuts like butter and very fast to. I only use aluminum.
I have a machine shop and cut all kinds of metals - from aluminum to hard steel. It cut them all like butter.
We use the blade in or large shop. We fabricate many different types of things and the blades cut whatever we need to cut. They are hardy and perform very well.